AMS 5936 Turbine Blade Steel UNS S46500 Forging Parts
Description
Our company provides AMS 5936 Turbine Blade Steel UNS S46500 Forging Parts Custom 465 Polished.
All AMS 5936 Turbine Blade Steel UNS S46500 Forging Parts Custom 465 Polished conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal, Turbine Blade Steel, AMS 5936
- Shape: Turbine Blade Steel
- Round bar / Wire rod (Diameter): 5.5mm to 800mm
- Square bar / Flat bar: 3mm to 800mm
- Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
- Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
- Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 - 2000mm
- Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
- Length: Fixed length or random length or based on the customer's special requirement.
Products Details
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
C (％): ≤ 0.020
Si (％): ≤ 0.25
Mn (％): ≤ 0.25
P (％)≤: 0.015
S (％)≤: 0.010
Cr (％): 11.0 ~ 12.5
Ni (％): 10.75 ~ 11.25
Mo (％): 0.75 ~ 1.25
Co (%): -
W (%): -
Al (%): -
Cu (%): -
Ti (%): 1.50 ~ 1.80 | Condition: H950
Tensile strength, σb/≥ MPa: 1765
Yield strength, σ0.2/≥ MPa: 1655
Elongation, δ ≥(％): 12.0
Reduction of area, ф ≥ (％): 55.0
Hardness | HBW: HRC 48 min. |
Applications:
AMS 5936 Turbine Blade Steel UNS S46500 Forging Parts Custom 465 Polished is often used in the Small Turbine Engine Shafts, Medical Instruments, Fasteners, Actuators.
Equivalent Grade:
AMS 5936
Custom 465
UNS S46500
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of AMS 5936 Turbine Blade Steel UNS S46500 Forging Parts and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging, we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order as the start of our cooperation, we can accept smaller quantities at the first time. Of course, after the start, we will have further and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing, DHL/FedEx/UPS accounts can be used for sampling, and the courier fee is borne by you.
Product Tags:
|
|
AMS 5936 Turbine Blade Steel UNS S46500 Forging Parts Images
|
